Calculated Industries 6250 Guide de dépannage télécharger pdf (Page 11)

Setup Mode

• Press BAR to display the previous screen in the Setup Mode.

• Press the < and > keys to move to the different segments and options in

the Setup Mode screens.

• Press the + and - keys to scroll through the different options available.

• Press 2ND and UNITS to change units of measure when applicable.

• Exit Setup Mode by pressing and holding DONE until the Current

Weather screen displays. See “Current Weather Mode” on page 15

for more information.

Screen 1: Time & Date

The very first time you power the console, you should enter the correct date and local time.

To change the time and date:

1. Press the < and > keys to select the hour,

minute, month, day or year segments. The

selected time or date setting blinks on and

off.

2. Press the + and - keys to adjust a value up

or down.

To choose between a 12-hour or 24-hour

clock, first select either the hour or minute

setting, then press 2ND and immediately

press UNITS. This toggles the clock

setting between the two clock types.

To choose between a MM/DD or DD.MM

display for the date, first select either the day or month setting, then press 2ND and imme-

diately press UNITS. This switches the console from one date display to the other.

3. Press DONE to move to the next screen.

Note: Whenever the console is repowered after power is off or lost, it will open to this screen. This

allows you to enter the correct time if needed. If nothing is done after 10 minutes, the screen will

time-out and go to the Current Weather screen.

Screen 2: Time Zone

The console is pre-programmed with a

combination of US time zones and the names

of major cities representing time zones around

the world. You can also configure your time

zone using the Universal Time Coordinate

(UTC, also known as Greenwich Mean Time or GMT) offset.

Note: UTC offset measures the difference between the time in any time zone and a standard time,

set by convention as the time at the Royal Observatory in Greenwich, England. Hayward,

California, the home of Davis Instruments, observes Pacific Standard Time. The UTC offset

for Pacific Standard Time is -8:00, or eight hours behind Universal Time (UTC). When

daylight saving time is observed, an hour is added to the offset time automatically. Use this

function in correlation with “Screen 3: Daylight Saving Settings” on page 8.

BAR

UNITS

TIME2ND

YEAR

Screen 1: Time & Date

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 55 56

Commentaires sur ces manuels

Pas de commentaire

Calculated Industries 6250 Guide de dépannage Page 11

Commentaires sur ces manuels

Produits connexes et manuels pour Pompes à eau Calculated Industries 6250