Calculated-industries 8503 User Guide Manuel d'utilisateur télécharger pdf (Page 5)

Dimensional Unit Keys

y — Yards Key

Enters or converts to yards.

f — Feet Key

Enters or converts to feet as whole or decimal numbers.

Also used with the i and / keys for entering Feet-

Inch Fraction values (e.g., 6 f 9 i 1 / 2).

Repeated presses during conversions toggle between

Feet-Inch Fractions and Decimal Feet.

i — Inch Key

Enters or converts to inches as whole or decimal numbers.

Also used with the / key for entering fractional inch

values (e.g., 9 i 1 / 2). Repeated presses during

conversions toggle between Fractional and Decimal Inches.

m — Meter Key

Enters or converts to meters.

Entering Square or Cubic

Dimensions

To label a dimension as "square" or "cubic," enter the

value, then press the desired unit key twice for square

and three times for cubic. For example, to enter 25 cubic

yards, press 2 5 y y y.

POCKET REFERENCE GUIDE - 3

1 2 3 4 5 6 7 8 9 10 ... 19 20

Pas de commentaire

Calculated-industries 8503 User Guide Manuel d'utilisateur Page 5