Calculated Industries HeavyCalc Pro Guide de l'utilisateur télécharger pdf (Page 8)

POCKET REFERENCE GUIDE — 4

s Square-Up Key —

Calculates the “Square-up”

(diagonal) Length given

entered Length and Width

values.

d Drop Key — Calculates

total drop (or fall) over an

entered Length given

entered percentage drop,

Inch per Foot drop, or

degrees of drop. Continued

presses will act as a “con-

stant add,” for displaying

successive drops.

Excavation/Volume Keys

¬ Loads Key — Calculates

number of loads for a given

Volume or Length, Width,

and Height (Depth) values

and stored load size.

S¬ Load Size — Stores load

size. Load size must be

entered as a cubic value

(e.g., 8yyy

S¬). The default size

is 8 cubic Yards.

F Cut/Fill Key — Used to

enter or calculate the cut or

fill amount. Based on entries

of proposed and existing

benchmarks. A fill is dis-

played as a positive value; a

cut as a negative value.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 52 53

Commentaires sur ces manuels

Pas de commentaire