Calculated-industries 4095-C User Guide Manuel d'utilisateur télécharger pdf (Page 28)

User’s GUide — 29

 (Material) MATL SIZE StEEL

 (Weight per Foot) PIPE SIZE 10.2528 LB PER FEET

 (Filled Weight/Foot) FILL SIZE 13.11634 LB PER FEET

 (Internal Area) AREA SIZE 6.605199 SQ INCH

Elbow Type

The Elbow Type function lets you chose between long or short

radius, and between factory and eld cut 45º Butt Weld (B.W.)

elbow types. The default value is for long radius, factory cut 45º

B.W. elbow type.

The Elbow option setting has an impact on the Take-Out

calculations as the radii vary between long and short Butt Weld

ttings. Additionally, factory made 45º B.W. elbow ttings can

have a different Take-Out calculation from the eld cut variants.

This function toggles the Elbow types between the following

options:

Butt Weld – Long

Default. Use this option when utilizing 90° long radius or

factory 45° long radius B.W. elbow ttings, or any odd-angle

long radius tting cut from a 90° B.W. elbow.

(cont'd)

KEYSTROKE DISPLAY

2593-4095 PipeSizeErrorStickers_4x2.eps 1/5/2012 9:22:59 AM

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 64 65

Pas de commentaire

Calculated-industries 4095-C User Guide Manuel d'utilisateur Page 28