Calculated-industries 4095-C User Guide Manuel d'utilisateur télécharger pdf (Page 32)

User’s GUide — 33

 TO 3-1/4 INCH

 GAP 0 INCH

 FIT° 39.81°

 IARC 3-15/16 INCH

 CARC 6-1/4 INCH

 OARC 8-9/16 INCH

The cut length for the pipe is 9 and 1/8 inches and bend angle

is 39.81°. Included in the outputs are the arc lengths to be used

to cut your butt weld elbow to the calculated bend angle. These

are inner arc length of 3 and 15/16 inches, center arc length of

6 and 1/4 inches, and outer arc length of 8 and 9/16 inches.

Note: To return the Welder’s Gap to the default 1/8”, press

  to reset your calculator back to default values.

Rolling Offset – Known Bend Angle

Find the center-to-center travel for a rolling pipe offset with a 4”

Roll and a 24” Offset using 45° factory-made long radius butt

weld elbows.

ADVANCE

LENGTH

OFFSET

ROLL

BEND

KEYSTROKE DISPLAY

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 64 65

Pas de commentaire

Calculated-industries 4095-C User Guide Manuel d'utilisateur Page 32